混凝土攪拌半掛運輸車前支撐開裂分析及優化

摘 要：某型攪拌半掛車在行駛23000km時，車架前支撐發現多處開裂的現象。使用UG軟件建立車架前支撐三維模型，通過仿真分析確定原結構的應力分布及應力最大值區域。通過結構優化創建多種車架前支撐結構，通過靜止、加速、制動三個工況下的有限元分析對比，尋找最優方案并驗證其可行性。

關鍵詞：攪拌半掛車 車架 前支撐開裂 結構優化

Cracking Analysis and Optimization of Front Support of Concrete Mixing Semi-trailer Truck

Chen Gang，Liang Peng，Wu Hongru

Abstract：Several cracks were found in the front support of the frame of a type of mixing semi-trailer when driving 23000 km. The three-dimensional model of frame front support is established by UG software， and the stress distribution and maximum stress area of the original structure are determined through simulation analysis. Through structural optimization， a variety of frame front support structures are created. Through finite element analysis and comparison under static， acceleration and braking conditions， the optimal scheme is found and its feasibility is verified.

Key words：a semi-trailer truck for concrete mixing， frame， cracking of front support of a frame， structure optimizatoon

1 引言

隨著國民經濟的發展以及國家對環境保護的日益重視，混凝土的生產及運輸也越來越受到重視。（剩余1346字）