基于MASTA軟件的某車橋齒輪修形優化設計

打開文本圖片集

摘 要：本文提供了一種基于MASTA軟件進行齒輪修形的快速方法，通過對齒輪載荷接觸分析，預測齒間載荷和齒向載荷分布狀況，對比齒輪修形前后齒輪振幅、傳動誤差變化及齒輪接觸斑點這些評價修形指標的變化情況，發現修行后齒輪的嚙合性能和承載能力都得到了很大地提升，為后期產品的優化設計和實際應用提供指導作用。

關鍵詞：MASTA軟件 齒廓修形 齒向修形 傳遞誤差（TE） 接觸斑點

Optimization Design of Modification of an Axle Gear Based on Masta Software

Liang Lanlan

Abstract：This paper provides a fast method for gear modification based on Masta software. Through the contact analysis of gear load， the distribution of inter tooth load and tooth direction load are predicted， and the changes of gear amplitude， transmission error and gear contact spots before and after gear modification are compared. It is found that the meshing performance and bearing capacity of the gear have been greatly improved after practice， which provides guidance for the optimal design and practical application of later products.

Key words：Masta software， tooth profile modification， tooth direction modification， transmission error （TE）， contact spot

1 引言

驅動車橋輪邊部分是整個汽車傳動系統的動力輸出終端，在整車運行過程中，由于輪邊行星排齒輪受不同的載荷工況、加工制造以及裝配誤差的影響，往往出現齒輪偏載、傳遞誤差偏大、齒輪錯位等現象發生，嚴重削弱齒輪的承載能力和傳動質量，增大齒輪早期失效的概率。（剩余1351字）