數控臥式銑鏜床高速主軸松拉刀機構優化設計與應用

打開文本圖片集

摘 要：方滑枕類數控臥式銑鏜床因其行程較大，主軸尺寸較長，拉刀機構安裝在主軸內部，在松刀及主軸旋轉時，拉刀機構會產生較大的變形量，對主軸產生較大的振動。通過靜力學分析及振動學理論將現有拉刀機構進行優化，經實際工程應用證明：優化后的拉刀機構主軸整體性能明顯改善。

關鍵詞：數控臥式銑鏜床；拉刀機構；有限元分析；振動；優化

中圖分類號：TG531  文獻標志碼：B  文章編號：1671-5276（2024）02-0092-04

Improved Design and Application of High Speed Spindle BroachMechanism for Horizontal Milling and Boring Machines

JIANG Ang， LIN Yang， CHI Haonan

（Genertec Shenyang Machine Tool Co.， Ltd.， Shenyang 110142，China）

Abstract：Due to long travel and large-sized spindle of horizontal milling and boring machines， and its automatic broach mechanism installed in the spindle， the automatic broach mechanism will cause deformation amount in spindle rotating or processing， resulting in vibration to spindle. With statics analysis and vibration theory， automatic broach mechanism is optimized. Practical application verifies the remarkable improvement in the overall performance of the optimized automatic broach mechanism spindle.

Keywords：horizontal milling and boring machines；automatic broach mechanism；finite element analysis；vibration；optimization

0 引言

隨著機床主軸高速化發展，主軸組件作為高速主軸的關鍵部件，其高速旋轉時的剛性、振動、可靠性對機床精度及壽命至關重要。（剩余4269字）