某大型綜合資源調查船直葉槳推進器基座安裝工藝研究

打開文本圖片集

摘    要：直葉槳推進器結構較大、安裝精度高，其基座加工和安裝是整個推進器最核心的工序。本文通過改裝加工銑床、改進加工工藝、利用高差法等先進的工藝技術，實現直葉槳基座平面度達到0.1mm等安裝技術要求，對直葉槳推進器等大型船舶設備的加工和安裝具有一定的指導意義。

關鍵詞：直葉槳推進器；基座安裝；高差法；銑床改裝

中圖分類號：U671.91+1                           文獻標識碼：A

Research on Installation Process of Straight Blade Propeller Base of a Large-scale Comprehensive Resource Survey Ship

CHENG Kun，  HOU Tao，  SUN Jingxin， YANG Wangquan，  LI Weihong

（ CSSC Huangpu Wenchong Shipbuilding Co.， Ltd.，  Guangzhou 510715 ）

Abstract： The Straight blade propeller has large structure and high installation accuracy， among which base machining and installation is the most basic and core process of the whole propeller. In this paper， by modifying the milling machine， improving the processing technology， and using advanced technology such as the height difference method， the installation technical requirements of the straight blade propeller base plane can reach the flatness of 0.1mm， which has certain guiding significance for the processing and installation of large ship equipment such as straight blade propeller.

Key words： straight blade propeller; base installation; height difference method; milling machine modification

1     前言

直葉槳推進器因其彌補了螺旋槳推進器在低航速下船舶推力和推進器扭力不足所導致的控制性能下降明顯等缺陷，正逐步取代傳統螺旋槳推進器應用于海洋科考類船舶。（剩余4787字）