錨鏈艙艙容計算方法研究

打開文本圖片集

摘    要：船舶錨泊系統由錨機、錨、錨鏈、錨鏈管、錨鏈艙、錨唇等構成，其中錨鏈艙的作用是儲存全船的錨鏈。通常，出現較多問題的是錨鏈艙有效艙容偏小，導致錨鏈無法全部收回。本文結合實際建造經驗，研討合理的錨鏈艙艙容計算方法，為其他船舶錨泊系統設計提供參考。

關鍵詞：錨鏈艙；艙容計算；錨泊

中圖分類號：U667.5                                  文獻標識碼：A

Research on Capacity Calculation Method of Chain Locker

LIAO Junfeng，  YE Zhenyi，  CHEN Rihui

（ CSSC Huangpu Wenchong Shipbuilding Co.， Ltd.，  Guangzhou 511462 ）

Abstract：  The mooring system consists of windlass， anchor， anchor chain， chain pipe， anchor lip， chain locker， etc. In particular， as a cabin in the hull， the chain locker is used to store the chain of the whole ship. The common problem is that the chain locker is too small to recover all the chain. Through the study of this research project， and in combination with the actual construction experience， the reasonable calculation method of chain locker capacity is discussed， which provides reference for the design of other ships' anchoring system..

Key words： chain locker; capacity calculation; mooring

1     前言

錨鏈艙作為錨泊系統的重要組成部分，其作用是儲存全船的錨鏈。（剩余3152字）