裝配式建筑用的4種纖維復材制備及性能提升研究
打開文本圖片集
中圖分類號： TQ342+ .742 文獻標志碼：A文章編號：1001-5922（2025）07-0060-04
Abstract：In order to improve the mechanical properties of fiber composites for prefabricatedbuildings，four kinds of fiber composite laminates with diferent components were prepared byusing a twin-screw extrusion mechanism， the shear properties，bending properties and impact properties of Ti/CF/PA6、Ti/GB/CF/PA6、Ti/nano-CaCO 3 ／ CF/PA6 and Ti/GB/nano-CaCO 3 /CF/PA6 were compared and analyzed，and the fracture morphology was observed. The results showed that adding GB or nano-CaCO 3 to Ti/CF/PA6 alone，as well as the addition of GB and nano-CaCO 3 together，increased the shear strength of the composite，and the shear strength of the composite material was the highest when nano-CaCO 3 was added alone.Adding GB or nano- .cac03 to Ti/CF/PA6 alone reduced the flexural strength of the composite，while addition of nano- CaCO3 alone increased the flexural strength of composites. Adding GB or nano ?CaCO3 to Ti/CF/PA6 alone，as well as the addition of GB and nano- .cac03 together，increased the impact strength of the composite，and the impact strength of the composite material was the highest when GB and nano- CaCO3 were added together. After adding nano .cac03 alone or the combination of GB and nano- CaCO3 ， the composites have good mechanical properties and can be applied in prefabricated building structural materials. Key words：prefabricated buildings；fiber composite materials；particle enhancement；mechanical properties；fracture morphology
裝配式建筑是指把傳統建造方式中的大量現場作業工作轉移到工廠進行，在工廠加工制作好建筑用構件和配件（如樓板、墻板、樓梯、陽臺等），運輸?shù)浇ㄖ┕がF(xiàn)場，通過可靠的連接方式在現場裝配安裝而成的建筑。（剩余5756字）