打葉復烤成品長梗率的影響因素分析

打開文本圖片集

摘要 通過對潤葉、打葉、回梗系統參數調整、新型異形篩應用進行研究，結合葉片結構、煙梗結構檢測結果，得出一套提升打葉復烤成品長梗率的關鍵參數模型，有效提高煙葉來料與設備工藝參數的匹配性，有利于提高打葉風分后的葉片和煙梗質量，提升成品長梗率，為復烤設備的調試和操作提供理論依據。

關鍵詞 打葉復烤;回梗系統;長梗率;打葉風分參數;新型異形篩

中圖分類號 TS 44  文獻標識碼 A  文章編號 0517-6611（2022）09-0175-04

doi：10.3969/j.issn.0517-6611.2022.09.043

開放科學（資源服務）標識碼（OSID）：

Influencing Factors Analysis of the Long-stem Rate of Threshing and Redrying Products

BAI Yin-liang， WANG Xiang-fei， LEI Xiang et al

（Hongta Tobacco（Group） Co.，Ltd.， Yuxi， Yunnan 653100）

Abstract The system parameter adjustment of leaf moisturizing， threshing， back stem system， and the application of new special-shaped sieve were studied and optimized. Combined with the detection results of leaf structure and tobacco stem structure， a set of key parameter model for the improvement of long-stem rate of threshing and redrying products was drawn. The matching degree of incoming tobacco materials and equipment process parameters was effectively improved. It was beneficial to improve the quality of leaves and stems after threshing and air separation and  improve the long-stem rate， which could provide theoretical basis for the debugging and operation of redrying equipment.

Key words Threshing and redrying;Back-stem system;Long-stem rate;Threshing and air separation parameters;New special-shaped sieve

隨著卷煙新工藝、新技術的不斷應用，在煙絲中摻配梗絲和薄片絲的比例不斷增大，使企業對煙梗的使用量激增。（剩余4108字）