基于多重網格法的齒輪熱彈流潤滑特性分析

打開文本圖片集

摘  要：該文基于多重網格法對齒輪的線接觸彈流潤滑問題進行求解，探討不同參數對計算結果的影響，發現油膜壓力及油膜厚度對于載荷和彈性模量的變化較為敏感；在對齒輪等溫彈流潤滑問題求解的基礎上，考慮熱效應、時變效應及壁面粗糙度對潤滑效果的影響。

關鍵詞：彈流潤滑；直齒圓柱齒輪；熱效應；粗糙度；時變效應

中圖分類號：TH132.41      文獻標志碼：A          文章編號：2095-2945（2023）13-0117-05

Abstract： In this paper， the problem of linear contact elastohydrodynamic lubrication of gears is solved based on multigrid method， and the influence of different parameters on the calculation results is discussed. It is found that oil film pressure and oil film thickness are sensitive to the change of load elastic modulus. On the basis of solving the problem of isothermal elastohydrodynamic lubrication of gears， the effects of thermal effect， time-varying effect and wall roughness on lubrication are considered.

Keywords： elastohydrodynamic lubrication; spur gear; thermal effect; roughness; time-varying effect

齒輪傳動依靠輪齒之間的嚙合來傳遞速度和力矩，是傳動系統中主要的承力部件。（剩余7113字）