平板式制動檢驗臺實際使用問題及優化研究

打開文本圖片集

【摘要】平板式制動檢驗臺是用于檢測車輛制動性能的設備，其在使用時會產生誤差。目前，平板式制動檢驗臺的檢定裝置實際使用時煩瑣費力，穩定性差，溯源效率低，嚴重影響對設備進行的量值溯源?，F(xiàn)行檢定規程缺乏動態檢測誤差方面的考量，所以我們需要對此重視并加以分析。

【關鍵詞】平板式制動檢驗臺；工作誤差；檢定

【DOI編碼】10.3969/j.issn.1674-4977.2023.06.031

Research on the Practical Application Problems and Optimization of the Flat Brake Inspection Platform

XU Lei， TAN Ge， XU Hancheng， CAI Ling

（Yancheng Metrology and Testing Institute， Yancheng 224001， China）

Abstract： The flat brake inspection bench is a device used to test the braking performance of vehicles， and its design principle may cause errors during use. At present， the calibration device of the flat brake inspection platform is cumbersome and laborious in actual use， with poor stability and low traceability efficiency， which seriously affects the quantity value traceability of the equipment. The current verification regulations lack consideration for dynamic detection errors， so we need to pay attention to and analyze them.

Key words： flat brake inspection bench； work error； verification

0引言

隨著社會經濟越發繁榮，汽車保有量逐年增多。（剩余3713字）