0.5級直流高壓分壓器測量不確定度評定及驗證

打開文本圖片集

【摘要】基于直流高壓分壓器檢定相關規范，采用“差值法”對直流高壓分壓器分壓比進行校準，對分壓比校準結果評定了測量不確定度，并采用“傳遞比較法”進行了校準結果的驗證。通過相對標準不確定度的計算，提出相應的技術分析建議，有助于提升0.5級直流高壓分壓器測量結果的準確性。

【關鍵詞】直流高壓分壓器；差值法；不確定度分析；傳遞比較法

【DOI編碼】10.3969/j.issn.1674-4977.2023.06.009

Evaluation and Verification of Measurement Uncertainty of 0.5 Level DC High-voltage Voltage Divider

ZHANG Weixian， WU Weilan， ZHANG Haiqi， LIU Yi

（Guangzhou Yueneng Power Technology Development Co.， Ltd.， Guangzhou 510000， China）

Abstract： Based on the relevant specifications for the verification of DC high-voltage voltage dividers， the "difference method" was used to calibrate the voltage ratio of DC high-voltage voltage dividers. The measurement uncertainty was evaluated for the calibration results， and the calibration results were verified using the "transfer comparison method". By calculating the relative standard uncertainty and proposing corresponding technical analysis suggestions， it is helpful to improve the accuracy of the measurement results of the 0.5 level DC high-voltage divider.

Key words： DC high-voltage voltage divider； difference method； uncertainty analysis； transfer comparison method

0引言

為確保實驗室直流高壓分壓器計量標準量值準確可靠，提高計量檢定水平，實驗室校準人員依據JJG 1007—2005《直流高壓分壓器》檢定規程，采用“差值法”對直流高壓分壓器分壓比進行校準，并對分壓比校準結果測量不確定度進行評定。（剩余3087字）