基于ISO 13400標準的車載以太網DOIP技術應用淺析

打開文本圖片集

【摘  要】車載以太網因具有大帶寬、高可靠、低時延、高精度時鐘同步的特點，已經被各大主機廠規劃為新一代電子電器架構的主干網絡。目前，使用DOIP技術進行車輛控制器數據刷新和故障診斷已經有實際的使用案例。本文重點介紹DOIP技術的連接方式、激活線要求、連接過程，可供后續技術實施參考。

【關鍵詞】DOIP;TCP;UDP

中圖分類號：U463.6    文獻標志碼：A    文章編號：1003-8639（ 2022 ）02-0031-03

Application Analysis of Vehicle Enthernet DOIP Based on ISO 13400 Standard

WANG Yuan-bo，CHEN Zi-lin，WU Meng

（Automobile Engineering Research Institute，Shaanxi Heavy Duty Automobile Co.，Ltd.，Xi'an 710200，China）

【Abstract】With the characteristics of large bandwidth，high reliability，low delay and high-precision clock synchronization，vehicular Ethernet has been planned as the backbone network of the new generation of electronic and electrical architecture by major host plants. At present，using DOIP technology for vehicle controller data writing and fault diagnosis has been a practical case. This paper focuses on the connection mode，activation line requirements and connection process of DOIP technology，which can be used as a reference for subsequent technology implementation.

【Key words】DOIP;TCP;UDP

作者簡介

王遠波（1982—），男，工程師，主要從事整車電子電器架構、整車原理、ECU的設計和開發工作。（剩余3675字）