某PHEV車型EMC試驗方法、超標分析與解決

打開文本圖片集

【摘  要】應對EMC國家標準GB/T 18387—2017和GB 34660—2017，具體針對某款混合動力汽車電磁兼容超標問題進行分析，通過排除法和對比法，對超標零部件進行具體定位，并提出相關EMC的解決方案，使整車試驗通過國標測試，滿足開發要求。

【關鍵詞】PHEV;EMC;問題分析;解決方案

中圖分類號：U463.6    文獻標志碼：A    文章編號：1003-8639（ 2022 ）02-0028-03

EMC Test Method，Over-standard Analysis and Solution for a PHEV Vehicle Model

XU Yong-hong，ZHANG Guo-guang，PAN Yi-ran，WU Zhao-su

（Dongfeng Motor Company Technology Center，Wuhan 430058，China）

【Abstract】The EMC national standards GB/T 18387—2017 and GB 34660—2017 is applied to analyze the electromagnetic compatibility over-standard problems of a hybrid electric vehicle. Through exclusion and comparison methods，the over-standard parts are positioned specifically，and the relevant EMC solutions are put forward to make the whole vehicle test pass the national standard test and meet the development requirements.

【Key words】PHEV;EMC;problem analysis solution

作者簡介

許永紅（1975—），男，現從事新能源系統架構開發工作。（剩余2868字）