SCR脫硝分區噴氨取樣裝置模擬研究及優化

打開文本圖片集

摘  要：近年來，分區噴氨控制技術廣泛應用于燃煤電廠，但其可靠性往往依賴于其測量取樣系統的準確性。該文采用數值模擬方法（CFD）對某測量裝置取樣管進行模擬，提出結構優化方案，優化后實現取樣管內流量的均勻分布，最后分析不同取樣布置方式對均流取樣的影響。

關鍵詞：CFD;分區噴氨;流場優化;分區影響因子;取樣管

中圖分類號：TK39      文獻標志碼：A          文章編號：2095-2945（2025）02-0068-04

Abstract： In recent years， the partitioned ammonia injection control technology has been widely applied in coal-fired power plants， but its reliability often depends on the accuracy of its measurement and sampling system. This article uses a numerical simulation method CFD to simulate the sampling tube of a measuring device， proposes a structural optimization scheme， and achieves uniform distribution of flow inside the sampling tube after optimization. Finally， the influence of different sampling arrangements on uniform flow sampling is analyzed.

Keywords： CFD; zoning ammonia injection; flow field optimization; zoning influence factor; sampling tube

選擇性催化還原（SCR） 煙氣脫硝技術以其運行可靠、脫硝效率高等優勢被廣泛應用于國內燃煤電廠，目前在運火電廠已經基本完成了SCR脫硝改造[1-3]。（剩余3005字）