高頻電刀測量不確定度評定及常見故障分析

打開文本圖片集

【摘要】本文旨在探討高頻電刀測量不確定度的評定方法，并對計量檢測中常見的問題進行深入分析。首先，介紹了高頻電刀測量不確定度的評定方法。其次，通過對高頻電刀輸出功率和高頻漏電流的測量模型進行分析，確定了不確定度的主要來源。最后，詳細分析了高頻電刀計量檢測中常見的問題，并提出了相應的解決方案。

【關鍵詞】高頻電刀；測量不確定度；評定方法；計量檢測

【DOI編碼】10.3969/j.issn.1674-4977.2024.06.087

Evaluation of Measurement Uncertainty and Analysis of Common Failures of High-Frequency Electrosurgical

XIE Fahui， QIU Zhibin

（Hainan Cory Metrology Technical Service Co.， Ltd.， Haikou 570206， China）

Abstract： This paper aims to explore the evaluation method of measurement uncertainty for high-frequency electrosurgical and conduct an in-depth analysis of common problems in metrological testing. Firstly， the evaluation method of measurement uncertainty for highfrequency electrosurgical is introduced. Secondly， by analyzing the measurement models of the output power and high-frequency leakage current of high-frequency electrosurgical， the main sources of uncertainty are identified. Finally， the common problems in the metrological testing of high-frequency electrosurgical are analyzed in detail， and corresponding solutions are proposed.

Keywords： high-frequency electrosurgical； measurement uncertainty； evaluation method； metrological testing

0引言

高頻電刀是一種電外科手術器械，它能夠部分替代傳統的機械手術刀，用于組織切割，為手術操作帶來了便利。（剩余2670字）