高速鐵路WJ-8型扣件彈條系統檢測與養護

打開文本圖片集

摘  要：介紹利用扣件安裝狀態檢查儀檢測扣件彈條離縫值，通過對扣件彈條離縫值分析，得出高鐵某區段內扣件離縫值均值和標準差，根據分析結果，合理安排扣件復緊時機，并通過對可控角度扣件扳手的研發，控制扣件彈條的扭力矩，使扣件的扣壓力達到設計標準值，更好地服役于鐵路運輸。

關鍵詞：扣件安裝狀態檢查儀;可控角度扣件扳手;扣壓力;彈條離縫值

中圖分類號：U238      文獻標志碼：A          文章編號：2095-2945（2022）14-0102-05

Abstract： In this paper， the fastener installation state tester is used to detect the free seam value of the elastic strip of the fastener. Through the analysis of the value of the elastic strip of the fastener， the mean value and standard deviation of the seam value of the fastener in a certain section of the high-speed railway are obtained. According to the results of the analysis， we are supposed to arrange the retightening time of the fastener reasonably， and through the research and development of the controllable angle fastener wrench， control the torque of the fastener elastic strip， achieve the buckle pressure of the fastener to reach the design standard value， and better serve in railway transportation.

Keywords： fastener installation status tester; controllable angle fastener wrench; buckle pressure; elastic strip seam value

鋼軌扣件是鋼軌與下部基礎重要的聯結零件，其作用是將鋼軌固定在軌枕上，防止鋼軌的橫縱向移動，并保持軌距，扣件還要提供一定的彈性和足夠的強度。（剩余4511字）