夾層爆炸焊接高強度鋁合金與鈦合金的界面特性和力學性能研究

打開文本圖片集

Abstract：Toachieve explosive bonding of high-strength low-melting-point aluminum alloy （A7075） and highstrength titanium alloy （Ti-6Al-4V），this study proposes the useof pure aluminum （A106O）as an interlayer and investigates the interface morphology and structural characteristics under different welding parameters.The microstructural features and tensile-bending properties of the composite plate interface were analyzed using optical microscopy （OM），scanning electron microscopy （SEM），and universal material testing machine.Explosive welding of the A7075/A1060/Ti-6Al-4V metal composite plates with interlayer bonding was successfully achieved under both setsof parameters，withnosignificant defectsobserved at the welding interface.Meltedregions were found at both the upper and lower interfaces under different explosive welding parameters.Mechanical performance results show that the interface shear strength of the composite plate prepared with a 2mm thickA106O interlayer is greater than . In terms of bending performance，samples with interlayer gap parameters of 2mm and 5mm （204 exhibited higher bending strength，with the maximum bending strength reaching 1209.9MPa .No fracture occurred at the welding interface during tensile bending tests.This study provides valuable insights into the explosive welding process for this type of composite plate.

Keywords：explosive welding；interlayer；welding interface；mechanical properties；aluminum/titaniumcomposite plate

1序言

在現代材料科學領域，復合材料憑借整合多種材料優異性能的獨特優勢，成為推動各行業發展的關鍵力量。（剩余9774字）