立式設備吊裝受力分析與控制要點

打開文本圖片集

摘 要：立式設備吊裝時的翻轉過程是典型的雙車抬吊作業，從實際的吊裝過程中可知，其翻轉過程對于主輔吊車通常都是變載荷作業。通過控制變量法和作圖法，對立式設備吊裝的翻轉過程進行受力分析，并總結其變化規律，分別從設計、策劃和實施三個方面提出了立式設備吊裝時的重點注意事項，可供相關從業人員參考。

關鍵詞：大件吊裝；立式設備；受力分析

doi：10.3969/j.issn.1004-8901.2024.06.007

中圖分類號：X050.7

文獻標識碼：B

文章編號：1004-8901（2024）06-0023-04

Force Analysis and Control Points of Vertical Equipment Hoisting

WANG Chao-jie

（Wuhuan Engineering Co.， Ltd.， Wuhan Hubei 430223， China）

Abstract：

The flipping process in vertical equipment lifting is a typical two-crane lifting operation. From the actual lifting process， it can be seen that the flipping process is usually a variable load operation for both the main and auxiliary cranes. Adopting the control variable method and drawing method， force analysis of the flipping process in vertical equipment lifting is carried out， and its rules of change are summarized. The key points for attention during vertical equipment lifting are put forward respectively from three aspects of design， planning and implementation， which can be of reference for related practitioners.

Keywords：

heavy lifting; vertical equipment; force analysis

doi：10.3969/j.issn.1004-8901.2024.06.007

立式設備的吊裝通常是由單主吊車提升設備頭部、單或多輔助吊車遞送設備尾部，將設備由水平狀態翻轉為豎直狀態，后再由主吊車將設備放置到基礎上安裝就位。（剩余4607字）