離子液體基電解液與聚丙烯隔膜的兼容性研究

打開文本圖片集

關鍵詞：離子液體基電解液；鋰金屬電池；鋰沉積行為；隔膜-電解液系統中圖分類號：O646；TM912文獻標志碼：ADOI：10.7652/xjtuxb202507015 文章編號： 0253-987X（2025）07-0150-09

Study on the Compatibility of Ionic Liquid-Based Electrolytes with Polypropylene Separators

HE Taohong 1，2 ，ZHANG Cheng1，LIYul，HANYushan1， ZHANG Zhicheng1，WANGJianan2，YANGHonghui' （1.School of Chemistry，Xi'an JiaotongUniversity，Xi'an 7loo49，China; 2.School of Energy andPower Engineering，Xi'an Jiaotong University，Xi’an 71oo49，China）

Abstract： This study aims to optimize the separator-electrolyte system by investigating the compatibility between ionic liquid-based electrolytes and commercial separators，thereby enhancing the performance of lithium metal batteries. Three commercial polypropylene separators （PP25Oo，PP3501， and PP2325）are selected and combined with a specific ionic liquid-based electrolyte （tributyl （methoxymethyl） phosphonium hexafluorophosphate， [P444101][PF6]） to construct different separator-electrolyte systems. The lithium-ion mobility， lithium deposition behavior，and lithium metal battery performance of these systems are systematically analyzed. The results show that the PP3501 separator exhibits the best compatibility with the ionic liquid-based electrolyte，achieving a high lithium-ion conductivity （0.103mS/cm ）and uniform lithium deposition on the lithium metal surface. This promotes stable cycling of Li|LiFePO4 batteries under high loading （ LiFePO4 active material loading of 11.25mg/cm2 ），with an initial discharge specific capacity of 129mA?h/g at a rate of （204 0.5C （where C represents the battery charge/discharge rate）. The findings provide theoretical and practical guidance for separator selection when using ionic liquids as electrolytes.

Keywords： ionic liquid-based electrolyte；lithium metal battery； lithium deposition behavior; separator-electrolyte system

隨著電動汽車和規?；瘍δ芗夹g(shù)的快速發展[1-3]，開發兼具高能量密度與安全性的鋰金屬電池已成為能源材料領域的研究熱點。（剩余14716字）