基于液冷與相變材料的復合動力電池冷卻系統設計

打開文本圖片集

關鍵詞：動力電池；復合冷卻；Ansys;PCM；液冷中圖分類號：TM912 文獻標志碼：ADOI:10.19968/j.cnki.hnkj.1003-5168.2025.13.006文章編號：1003-5168（2025）13-0033-05

Design of Cooling System for Composite Power Battery Based on Liquid Cooling and Phase Change Materials

JIA Mingzheng (Huanghe Jiaotong University,Jiaozuo 454950, China)

Abstract: [Purposes] To better control the power battery temperature and improve the temperature uniformity of the battery module,this study designs a composite power battery cooling system composed of liquid cooling and phase change materials.[Methods] By adding phase change materials between the batteries in the liquid cooling system battery module,the cooling efect can be improved.Meanwhile，Ansys was used to analyze the influence of diffrent factors on the cooling system of the composite power battery.[Findings] The results indicate that compared to standalone liquid cooling and PCM-only cooling systems,the composite power battry cooling system composed of liquid cooling and PCM can better control the maximum temperature,minimum temperature,and temperature difference of the power battery module.The maximum temperature of the power batery increases with the cooling water flow rate in the cooling plate,with a gradually diminishing rate of increase.Since the liquid phase ratio of PCM between power batteries increases with PCM thickness at the same discharge rate,the maximum temperature of the power battery module decreases with increasing of PCM thickness,but there is an optimal range for

PCM thickness.[Conclusions] The research results can provide reference for the design of multimechanism coupled power battery cooling systems.

Keywords: power battery; composite cooling; Ansys; PCM; liquid cooling

0 引言

大力推進新能源汽車發展是我國實現“碳達峰”“碳中和”目標的有力保障，同時也是應對全球氣候危機的有效途徑之一。（剩余8105字）