納米碳球切削液的潤滑性能及機理研究

打開文本圖片集

中圖分類號：TB34；TH140 DOI：10.3969/j.issn.1004-132X.2025.04.008

Study on Lubricating Performances and Mechanism of Nano-carbon Balls Cutting Fluids

SUN Hao1 LAN Qixin2 YAO Bin2* LU Jingjing1 ZHANG Jinhui2 PAN Zhirong2 ZHAO Kexin2 1.AECC Harbin Dongan Engine Co.，Ltd.，Harbin，150060 2.School of Aerospace Engineering，Xiamen University，Xiamen，F(xiàn)ujian，361005

Abstract： Nano-carbon balls cutting fluid was applied to the cutting processes of difficult-to-machine aerospace gear steels （15Cr14Co12Mo5Ni2W） ，and the lubrication enhancement effects of nanocarbon particles on the cutting fluid were investigated.Firstly，a cutting force model for metal cutting was established to analyze the relationship between cutting lubrication and cutting forces. Furthermore，through combined friction-wear tests and milling experiments，the lubrication performance of nano-carbon balls cutting fluid was evaluated in terms of friction coefficient，wear volume，friction surface quality，and cuting forces. Compared with the base cuting fluid，when the mass fraction of nano-carbon is reached 0.02% ，the milling forces for the gear steels are decreased by over 10% ，and surface roughness is reduced by more than 15% . Experimental observations reveal that nano-carbon particles on the friction contact surfaces preferentially are adsorbed onto micro-peak regions with higher surface free energy，forming a nano-carbon adsorption film.Lubrication mechanism analysis indicates that this adsorption film may exert a friction-reducing“micro-bearing” effects.

Key words： nano-carbon ball;cutting fluid; lubrication mechanism； miling; difficult-to-cut gear steel

0 引言

難加工金屬材料的切削存在切削力大、切削溫度高、刀具磨損/破損嚴重等問題，使得切削質量較難控制。（剩余16638字）