基于參數映射的開式整體葉盤流道銑削路徑生成方法

打開文本圖片集

關鍵詞：開式整體葉盤；曲面分層；測地偏移；粗加工；刀位規劃

中圖分類號：TH164；TP391.7

DOI：10.3969/j.issn.1004-132X.2025.04.005 開放科學（資源服務）標識碼（OSID）：

Generation Method of Milling Paths of Open Blisk Channels Based on Parameter Mapping

HAN Jiang1，2 ZHANG Wenqiang1，2 TIAN Xiaoqing1，2 * XIA Lian1，2 1.School of Mechanical Engineering，Hefei University of Technology，Hefei，230009 2.Anhui Provincial Intelligent CNC Technology and Equipment Engineering Laboratory， Hefei，230009

Abstract： A machining strategy for variable layer thickness with layered surfaces was proposed to address the rough machining issues of the channels across the entire blisk components. Considering the characteristics of the variation in the width of the channels across the entire blisk components，the geodesic ofset was used to determine the toolpath boundaries on both sides of the channels，and the step size and the number of paths were determined. A planning method for the longitudinal milling path along the channels was proposed，and then the tool axis vector of the channel boundaries is calculated，and the tool axis vector of the middle cutter positions of the channel boundaries is calculated by quaternion interpolation. The calculation results show that，compared with the conventional uniform layering method using the blisk hub rotary surface offset or the blisk covering rotary surface offset， the variable layer thickness surface delamination may better adapt to the surface changes from the covered rotary surface to the hub rotary surface，the surface quality of the blades is ensured，with the advantage of a uniform machined blade surface allowance，and the feasibility of the algorithm was verified through machining examples.

Key words： open blisk; surface layering; geodetic offset; roughing;tool path planning

0 引言

開式整體葉盤類零件在航空、船舶、化工等各個領域里起著至關重要作用，其設計、加工制作受到廣泛關注。（剩余13635字）