中厚板H型鋼高效全熔透焊工藝和焊接材料研究

打開文本圖片集

摘要：對中厚板H型鋼主角焊縫不開坡口熔透焊工藝及接頭焊接工藝與焊接材料進行試驗研究，實現了中厚板H型鋼主角焊縫不開坡口熔透焊達到熔透要求，擁有良好的無損檢測合格率，焊接變形小，生產效率高。通過對焊接接頭進行性能檢測，結果表明：焊接接頭不低于Q355B鋼力學性能要求。

關鍵詞：H型鋼；雙面焊；高效；焊接材料

Efficient full penetration welding technology and material for medium thick plate H-shaped steel

TU Taoxiong1， WANG Zhiguo2， YI Wuqiang1

1. Wuhan Tian-Gao Welding Co.， Ltd.， Wuhan 430056， Hubei， China

2. Guangzhou Ship International Co.， Ltd.， Guangzhou 511400， Guangdong， China

Abstract： Analyze the weld penetration welding technology and joint flaw detection of H-shaped steel plate without groove. The research shows that the weld penetration welding of H-shaped steel plate without groove can meet the requirements of penetration and has a good flaw detection rate. Through the analysis of the weld joint performance， the weld joint can meet the mechanical performance requirements of Q355B.

Keywords： H-shaped steel; double-sided welding; high efficiency; welding material

1 序言

H 型鋼具有質量輕、剛度好、質量優、外觀美、施工方便及施工速度快等優點，被廣泛應用于建筑鋼結構。（剩余3343字）