永磁吸附儲罐爬壁機器人吸附特性研究

打開文本圖片集

中圖分類號：TP242 文獻標志碼：A doi：10.3969/j.issn.1006-0316.2025.06.011

文章編號：1006-0316（2025）06-0074-07

Research on the Adhesion Characteristics of Permanent Magnetic Adhesion Storage Tank Wall-ClimbingRobot

MA Mingyue’，GONG Chuanjiang'， ZHOU Huaizhong1， JIANG Bo’，LONG Zhang （1. Nanchong Special Equipment Supervision and Inspection Institute， Nanchong 637001， China;

2.School of Mechatronic Engineering，Southwest Petroleum University， Chengdu 610500， China）

Abstract ： In order to solve the problems such as poor climbing stability and potential safety hazards of automatic tank defect detection robot， a permanent magnet adhesion tank wallclimbing robot is designed and its adhesion characteristics are analyzed. The adhesion mechanism based on permanent magnet is designed. The staticmodelof therobotis built through the analysis of the failureof therobotatwork，and the minimum magnetic adhesion force required by the robot in normal work is calculated.In order to ensure that the minimum magnetic adhesion force is taken as the magnetic adhesion condition，the magnetic adhesion unit is designed using the linear Halbach array arrangement of five permanent magnets，and the influence of permanent magnet volume，armatureandair gap length on the adhesion force is analyzed.Through finite element analysis，a cuboid magnetic block with a volume of 30mm×30mm×30mm isfinally designed， the armature size is 150mm×54 mm×3mm ，the addition direction is positive along the Z axis， the rated air gap is 10mm during adhesion， and the minimum magnetic adhesion force is 493.02N ，which could ensure the adhesion stability of the robot.

Key words ∵ magnetic adhesion ; wall-climbing robot ; mechanical analysis ; finite element analysis

大型儲罐是油氣能源常用的關鍵存儲設備，其在自然環境下長期使用會產生腐蝕、裂紋等缺陷，進一步擴展開裂則會發生泄漏甚至爆炸，導致嚴重的安全事故，因此相關法規強制規定了儲罐需定期檢測[1-2]。（剩余5475字）