網格激光高反抑制與中心提取誤差修正

打開文本圖片集

Grid laser high back suppression and center extraction errorcorrection

WANG Biao，WUNannan，MA Yuhan，YAO Yanfeng，WANG Yonghong，LI Junrui （School of Instrument Science and Optoelectronic Engineering， Hefei University of Technology， Hefei 230000，China） * Corresponding author， E-mail： yhwang@hfut. edu. cn

Abstract：When a line laser scans metal workpieces，the high reflectivity of certain metal surfaces often leads to poor scanning results. While grid laser scanning is faster than single-line and multi-line scaning， challenges such as center extraction and optical plane positioning hinder its ability to meet the demands of efficient real-time detection of metal workpieces.This study proposes a novel method to addres these issues by calibrating the rotation angle of a polarizer to optimize the suppression of high surface reflectivity through the polarization state of the grid laser. In addition，a laser center mapping technique based on normal vectors is developed，where the laser center is mapped to the optical plane using the eigenvector corresponding to the maximum eigenvalue of the pixel Hessan matrix. A center extraction method based on affine transformation is also introduced，enabling the transformation of non-orthogonal grids into orthogonal ones to improve the accuracy of 3D reconstruction.Furthermore，an error correction model is established to reduce measurement system errors by accounting for variations in height. Experimental results demonstrate that the traditional grid laser algorithm struggles with missing edges when scanning highly reflective metal surfaces，resulting in a measurement error of 0.8mm . In contrast，the proposed method effectively suppresses the impact of high reflectivity，achieves accurate mapping between the laser center and the optical plane，and reduces the measurement error to 0.39mm .After error correction，the accuracy is further improved，achieving a measurement error of just 0.1mm ，representing an 87.5% reduction compared to the traditional grid laser algorithm.In conclusion，this study investigates 3D reconstruction using grid laser scanning under high-reflection suppresion for metal surfaces，significantly improving both scanning efficiency and measurement accuracy. The proposed method provides a valuable approach and reference for future industrial measurement applications.

Key words： three-dimensional measurement；grid laser;polarization state；center extraction；normal vector

1引言

現代科技技術發展日新月異，對尺寸的測量需求從最初的一維發展到三維，從某個點的測量變?yōu)檎麄€(gè)物體的三維形貌測量。（剩余23217字）