不同拋光方案對全瓷材料表面粗糙度影響的研究進展

[摘要]全瓷材料因其理想的強度和美學效果等特征成為口腔修復的一類重要材料，而當修復體制作完成之后，通常需要進行調牙合或調磨鄰接，這些調磨會增加修復體表面粗糙度，臨床常采用拋光來解決全瓷材料表面粗糙的問題，研究人員就不同拋光方案對全瓷材料表面效果的影響做了大量研究，本文就此作一綜述。

[關鍵詞]全瓷材料；拋光；表面粗糙度；上釉；口腔修復

[中圖分類號]R783.1    [文獻標志碼]A    [文章編號]1008-6455（2024）05-0193-04

Research Progress in Effect of Different Polishing Methods on Surface Roughness of Ceramic Material

WU Chunyu1，2， WANG Xingkang3， JIANG Tao2

（ 1.Binzhou Medical College， Yantai 264000， Shandong， China; 2.Dental Medical Aesthetic Center， Jinan Stomatological Hospital， Jinan 250002， Shandong， China; 3.Department Ⅱ of Stomatology， Pudong New Area Institute of Eye and Dental Disease Prevention， Shanghai 201399， China ）

Abstract：  Due to ideal strength and aesthetic effect all-ceramic material has become an important material in the field of prosthetic dentistry. By working with ceramic restorations， the dentist often needs to perform clinical adjustments through wear by diamond burs， consequently removing the superficial glazing layer， which will increase the surface roughness of the prostheses. Polishing is commonly used in clinical to solve the problem of rough surface of all-ceramic material. Researchers have done a lot of research on the influence of different polishing schemes on the surface effect of all ceramic material.

Key words： all-ceramic material; polishing; surface roughness; glazing; prosthetic dentistry

全瓷修復體因其優秀的生物相容性、出色的美學效果等優點，已被越來越多的患者所接受。（剩余13709字）