淺談3D打印技術在船舶領域的應用

打開文本圖片集

摘    要：針對3D打印技術在船舶行業應用中面臨的問題，提出分段式打印建造玻璃鋼船的方案；針對分段合攏，提出兩種膠接接頭形式；對打印過程中強力構件的處理方式和分段布置形式進行對比分析，得到船體中部分段在3D打印時的最優布置形式。

關鍵詞：3D打印技術；分段式打??；膠接接頭；布置形式

中圖分類號：U671.99                              文獻標識碼：A

Research on Application of 3D Printing Technology in Shipbuilding

MEI Menglei1，  QIN Qi2，  FANG Xinyue3，  CHEN Shunhong 2

（ 1.China Coast Guard Academy，  Ningbo 315801; 2. Guangzhou Marine Engineering Corporation，  Guangzhou 510250; 3.No.63969 Unit，  Nanjing 210000 ）

Abstract： In view of the problems faced by 3D printing technology in the shipbuilding industry， a new scheme of building FRP ship by printing ship blocks is proposed and two types of adhesive bonded joints are shown for blocks assembly. And later the methods for the treatment of the strong components and the arrangement of the blocks in the printing process are compared and analyzed. Finally the optimal arrangement of the blocks is obtained for hull mid blocks during 3D printing.

Key words： 3D printing technology; blocks printing; adhesive bonded joints; blocks arrangement

1    前言

3D打印是一種先進的加工制造技術，具有節省原材料和制造靈活的特點，有著巨大的應用前景。（剩余4446字）