一種雙斷點塑殼斷路器觸頭系統平衡優化設計

打開文本圖片集

摘 要： 雙斷點塑殼斷路器具有良好的限流能力和配電安裝優勢，其觸頭系統的平衡和穩定性能是產品結構設計的關鍵。針對一種結構簡單、安裝方便的雙斷點觸頭系統，結合力學分析和仿真計算，對系統結構進行優化設計，提出一種觸頭接觸穩定、壓力一致性和自動平衡性能良好，可實現斥開卡住功能的結構設計思路。

關鍵詞： 雙斷點塑殼斷路器; 觸頭系統; 接觸壓力; 自動平衡性能

中圖分類號： TM561

文獻標志碼： A

文章編號： 2095-8188（2025）02-0041-06

DOI： 10.16628/j.cnki.2095-8188.2025.02.007

Balance Optimization Design of Double-Break Moulded Case Circuit Breaker Contact System

GAO Jingbo

（Jiangsu Daqo Kfine Switch Co.， Ltd.， Zhenjiang 212000， China）

Abstract： The double-break moulded case circuit breaker have good current limiting capability and advantages in power distribution and installation.The balance and stability of their contact systems are the keys to product structure design.In response to a double-break point contact system with simple structure and easy installation，combined with the mechanical analysis and simulation calculation，the system structure is optimized.A structure design concept is proposed，which features provide a stable contact，good pressure consistency and automatic balancing performance，and can realize the function of repelling and getting stuck.

Key words： double-break moulded case circuit breaker; contact system; contact pressure; automatic balancing performance

0 引 言

塑殼斷路器主要應用于低壓配電回路，起到控制和保護電力設備的作用，是低壓電器中極其重要的設備之一。（剩余4481字）