凹槽對6063鋁合金力學性能的影響

打開文本圖片集

中圖分類號：TG115.5；TB115.1 文獻標志碼：B

Effect of notch on mechanical property of 6063 aluminum alloy

YANG Tingweia， WANG Guana，b， KOU Linyuana，b，REN Xuea，LI Xinhuia，LIU Hongpinga，WANG Genga

（a.School of Mechanical Engineering；b.Ningxia CAE Key Laboratory of Intelligent Equipment， Ningxia University，Yinchuan ，China）

Abstract： To investigate the efect of notches on the mechanical properties of 6O63 aluminum aloy，five different specimens with single notch and double notches（the space of the two notches is 1.O，2.0，3.0， and 4.0mm ，respectively） are designed，and its mechanical properties are analyzed using room temperature uniaxial tension experiment combined with numerical simulation method. The results show that the local notch cause a significant decrease in the plasticity of the plate and a significant reduction in fracture displacement；the stress of specimens with notch/notches is higher，and its stress concentration is more serious.

Key words： aluminum alloy；defect；failure；uniaxial tension； stress concentration

0 引言

6××× 系鋁合金比強度高、密度低、抗沖擊性能優良、耐腐蝕，常用于汽車防撞梁、電池托盤等[1]6063鋁合金為Al-Mg-Si合金，具有密度低、強度高、可塑性強、可焊接、耐腐蝕等優點，廣泛應用于飛機、汽車等，是輕量化的理想材料之一[2]。（剩余5607字）