挖掘機工作過程動力特性仿真及主構件參數多目標優化設計方法

打開文本圖片集

中圖分類號：TH122 DOI：10.3969/j.issn.1004-132X.2025.06.025 開放科學（資源服務）標識碼（OSID）：

Simulation of Dynamic Characteristics of Excavator Working Processes and Multi-objective Optimization Design Method of Main Component Parameters

LIN Shuwen LU Zhe* WEI Shijia CHEN Jianxiong GU Tianqi XIE Yu School of Mechanical Engineering and Automation，F(xiàn)uzhou University，F(xiàn)uzhou，350108

Abstract： To address the issues that the existing excavator component parameter optimization design could not ensure optimal performance across various positions and conditions throughout the excavation operations，and did not consider the energy consumption characteristics of the operational processes，a new multi-objective optimization design method of excavator work device parameters with the target of the power and energy consumption characteristics of the whole typical working condition operational processes Was studied. Through the dynamics simulation of the ADAMS-based parametric excavator virtual prototype，the drive force and power characteristics of the hydraulic cylinders in four typical operating conditions were analyzed， the optimization conditions of work devices were determined，and a new multi-objective optimization model was established which considering the drive force transmission ratio and power characteristics of the hydraulic cylinders in the typical operating conditions. The parameters of the bucket，stick and boom were optimized in a sequential multi-objective process in combination with the parametric virtual prototype of a complete excavator work device. The optimization results demonstrate the effectiveness of the new multi-objective optimization method by improving the performance of the work device in transmiting power during excavator operations while reducing the energy consumption of the hydraulic cylinders.

Key words： excavator; main component parameter; virtual prototype;processing characteristics： multi-objective optimization;sequence optimization

0 引言

挖掘機工作裝置主構件參數直接影響挖掘機的作業性能，合理的工作裝置主構件參數能夠高效地發揮各液壓缸的理論推力，使挖掘機在各工況的作業過程中具有良好的工作性能。（剩余13880字）